Aluminum is one of the most popular materials for fences. It’s easy to install and looks great against a variety of colors. You can get this material from hardware stores, or online retailers like Amazon.
DIY aluminum fence kits are available for purchase. These kits come with everything you need to build an aluminum fence, including the posts and panels. Read more in detail here: diy aluminum fence kit.
Starting a fence project might be intimidating, but as with any major effort, preparation and planning are essential. We’ll provide you a step-by-step tutorial on how to put up an aluminum fence in this post.
Contents
Prerequisites for Fencing
Check the precise location of your property lines and make sure they are clearly marked so that the fence construction takes place on your land. Also, check for any easements that may restrict the design and placement of your fence. It’s also a good idea to look into any municipal restrictions on the size of the planned fence. Neighbors should be engaged in the planning process, and those who are immediately next to you may be able to divide the expense. It may be essential to apply for a construction permission, depending on the local council legislation.
Aluminum Fencing’s Advantages
Putting Up an Aluminum Fence is extremely simple when compared to other fencing alternatives. Furthermore, aluminum fence is a strong and long-lasting solution that needs minimal upkeep. Aluminum’s adaptability allows it to blend into a variety of settings, and it also comes in a variety of hues. Aluminum fences are appropriate for installation in the front and rear yards, as well as for pool security. If you require enclosures for dogs or children’s play areas, this sort of fence is a good option.
Putting Up an Aluminum Fence
Required Materials
Allow for end posts, corner posts, gate posts, and line posts when designing an aluminum fence. End posts have just one side with holes and are used as beginning and stopping points, while corner posts have holes on both sides and are used to produce right angles. Line posts are used for straight fence lines and feature holes on both sides. To sustain the gate’s weight and survive the shock when the gate latch shuts, gate posts should be positioned on both sides of the gate.
Because panels come in 6-foot lengths, you’ll need to account for this in your calculations. Allow two panels for a 10-foot span, for example. Some suppliers sell panels in a variety of lengths and widths, which may be specified when placing an order. The appearance and expense of your fence are both affected by the fence’s height. For residential use, fence panels are available in heights ranging from 2.5 to 6 feet. More ornate designs may be seen on gates. For driveways, a double gate will be required, whereas walkways will just need a single gate.
For designing and buying aluminum fence materials, several suppliers provide online assistance. With the help of customer service pros, the procedure may be made easier. They may provide a variety of services, including software that enables you to envision the fence in its final position. Enter the dimensions of the fence, including any gates necessary, and the program will calculate the precise number of aluminum panels and posts needed. Of course, the dimensions provided must be double-checked to ensure that the installation procedure is not slowed by the need to buy more posts or panels. The variety of colors and grades of aluminum fence available may also be seen online. The components are also available for purchase online, along with highly detailed installation instructions to assist the inexperienced fence builder. Of course, reading the directions properly is essential.
You’ll need a lot of tools and other materials in addition to the fence components. If required, certain tools may be hired.
Ensure that you have the following:
- a digger for digging post holes
- Mixer and concrete mix
- a hoe and a shovel
- The level is rather lengthy.
- Stakes
- String
- A hacksaw is a tool that is used to cut through
- a mallet made of rubber
- A hammer
- Drill or screwdriver
Layout Preparation
A thorough fence layout is also required as part of the preparatory process. Measure the area to be gated and place stakes at strategic locations where post holes will be drilled. Plan out where you’ll need corners and gates. To determine the line where the posts will be placed, tie a thread between the corner stakes. It’s critical that all of the stakes make contact with the string.
Post Hole Excavation
The aluminum posts for your fence will need to be placed in holes that are 2 feet deep and 6 inches in diameter. Make sure you know where all the underground wires or telephone lines are before you get the post hole digger or auger out, so you don’t cut any vital utilities. Determine the number of sections in each straight run of fence and distribute the available space to ensure that short runs are appropriately spaced at the ends. If you have a huge area to fence that will need a lot of metal posts, consider renting an auger. The difficulty of the digging will be determined by the sort of soil you are digging in.
End posts should be put as near as feasible to the house without actually touching it. If the home footings require you to be more than 4 inches away from the house, you will need to connect the end posts to the house using wall mounts.
It’s better to utilize a wet-set concrete mix since it creates a more secure anchor system for each post. It’s easier if the holes are dug first and then three to four fence pieces are assembled with their corresponding posts on the ground. Stand them all up at the same time, position them in the pre-dug holes, and then mix the concrete for three to four holes.
Make sure the screw heads are towards the property.
How Much Does Aluminum Fencing Cost to Install?
When it comes to determining how to get the fence you want for your property, cost is a big consideration. Because aluminum fencing is often pre-built and divided, some of the labor costs of fence construction are saved. Aluminum fence prices vary per foot or per 100 feet when It was installed by a professional. The cost of the installation will vary according on the height, style, and intricacy of the installation. The installation will be more challenging if the land is slanted or if there are additional obstacles like as trees or huge boulders.
The supplies for an aluminum fence for a DIY project may vary in price, while there is definitely some labor savings and the ability to use existing equipment when performing your own fence construction. The style, metal strength needed, Height of the fence, and number of posts and gates will all influence the pricing. The table below should help you decide between several possibilities.
Low Probability
$3,100 – $2,650
Estimated Average Cost
$4,310 – $3,150
Estimated to be high
$6,190 – $4,680
Description
DIY 120 Linear Feet
DIY 120 Linear Feet or Pro
120 Linear Feet, Professional
Cost per linear foot
$$$$$$$$$$$$$
$28–$36 per foot
$32–$46 per foot
Height of the fence
2.5 to 4 ft
3 to 5 ft
4 to 6 ft
It was installed by
DIY
Professional or do-it-yourself
Installed by an expert
The price of a fence
The price range is $1,590 to $1,750.
$2,490 – $1,720
ranging from $2,350 to $3,150
Cost of Supplies
Between $150 and $300
Between $250 and $400
Between $250 and $400
Gates for Walkways
1
1-2
1-3
Gates for the Driveway
0
1
1
Difficulty of the Site (Yard)
Simple
Moderate / Simple
Easy / Difficult
Permits and/or Surveys are required.
From $75 to $225
From $75 to $225
From $75 to $225
Other Cost Factors to Think About
The Location of Your House – The cost of delivery or professional installation will include travel time and gasoline expenses.
Barriers — The expense of removing old fences, trees, roots, rocks, and other obstacles increases.
Ground Elevations – Changing the ground level or the fence layout will increase the cost and length of time it takes to finish the fence.
Time of Year – You should think about when you want the fence to be installed. During peak seasons, installation businesses are less likely to provide discounts or competitive price choices. For planned installations, avoid months with a lot of rain or that might be terrible weather.
Final Points to Consider
Aluminum is robust and long-lasting, yet it’s also light and simple to carry and install. The panels are pre-assembled and adhere to aluminum fence posts. The aluminum fence is a contemporary, long-lasting solution that may be assembled by oneself. The powder coating resists corrosion and is available in a variety of colors that may be combined and matched to create a one-of-a-kind aluminum fence.
The “how hard is it to install an aluminum fence” is a question that has been asked for years. This guide will give you all of the information you need to know about how to install an aluminum fence.
Frequently Asked Questions
Can I install an aluminum fence myself?
A: No, you cannot install an aluminum fence yourself. An aluminum fence is typically installed by a professional with the proper tools and training.
How do you install aluminum fence?
A: Aluminum fence is installed by first removing the old fencing and then installing a new aluminum fence. The process could vary depending on the size of your project, but it typically begins with locating where you want to start cutting and lifting any boards that are not meant to be removed while digging up dirt.
How far off the ground should an aluminum fence be?
Related Tags
- how to install aluminum fence
- add gate to existing aluminum fence
- diy aluminum fence gate
- how to install aluminum fence on concrete
- 4 x 8 aluminum fence panels
Also Read:
- None Found
